Aquasure Wetsuit Adhesive 28 gr.

Repair all kinds of cuts in wetsuits with Aquasure FD, a transparent and waterproof urethane adhesive. After drying, it becomes a flexible rubber glue that is ideal for attaching outdoor gear that is in constant motion. It also offers excellent resistance to abrasion.

Durable- Strong urethane repair adhesive permanently adheres to surfaces and dries transparently

Flexible - Cures to a rubber band that bends with neoprene and other springy gears

Universal Abrasion Resistant - Adheres to all types of outdoor fabrics including: neoprene, rubber, nylon, canvas, and vinyl.

Aquasure + FD permanently seals and repairs GORE-TEX waders and other waterproof materials, packraft, as well as neoprene waders and felt sole fishing boots.

How to use:

Clean the surface. Apply Aquasure directly. Let it dry overnight (10-14 hours).

Holes and tears: Make a stop with masking tape. Fill the gap 5mm below the edge with Aquasure. Remove the tape after it has completely dried.

Seams: Apply a 2mm thick coat over the seam edges by at least 5mm. Apply with light pressure to close the tissue surfaces.

Note: Avoid skin contact. To remove Aquasure from hands, use a cloth soaked in 99% alcohol and then wash with soap and water.