BRANCH SAVER EJECT PETZL

Designed for pruning, the EJECT allows the installation of a work rope, protecting the tree, even in closed forks. It offers several installation configurations in one or two branches and has a regulator-choke that allows to precisely adjust the length of the branch guard. Rope ascents and movements through the tree are optimized thanks to the high-performance pulley that favors the circulation of the rope in the anchorage. The system is easily retrieved from the ground thanks to the included recovery ball.

- Several possible installation configurations on the branch: surrounding or strangling. It is also possible to pair two anchors for branches of small thickness.

- Throttle function with regulator that allows to precisely adjust the length of the tape.

- Specific design that allows to protect the tree.

- Product supplied with a highly visible yellow tape with a length of 1.5 m. The belt can be replaced or connected with another 1.5 or 2.5 m belt to lengthen and allow work on large trees.

- Installation of the rope possible only if it is correctly installed and the locking attachment point is locked.

- The lockable attachment point remains locked while the rope is installed on the pulley.

- The use with double rope (DdRT/MRS) is prioritized. The system can also be used with a single rope (SRT/SRS) (more information in the technical sheet).

Optimized yields:

- Optimized rope circulation at the anchorage thanks to the integrated high-performance pulley.

- Possible use by two people, to carry out a rescue.

System easily recoverable from the ground:

- Unlockable attachment point with the recovery ball, once the rope has come off the pulley.

- 21mm yellow retrieval ball, specifically designed for the EJECT, to facilitate retrieval from the ground.

- Belt and buckle narrow enough to reduce the risk of getting caught in the tree.

The EJECT branch guard allows you to work within the framework of the ANSI Z133.

Specifications

Breaking load: 25 kN

Maximum authorized load: 250 kg

Certifications: CE EN 795 B, CE EN 12278, UKCA, EAC, TS 16415

Materials: aluminum, stainless steel, polyamide and polyester

Weight: 490g

Min. rope diameter: 11 mm

Max rope diameter: 13 mm

Sheave type: sealed ball bearing

Sheave diameter: 28 mm

Yield: 95%